Lasers4NetZero

Webinar#1: From concept to implementation of laser beam shaping in e-mobility

Mode: Online
Date: 16th December,2026
Time: 09:00 – 10:30 GMT (UK time)
Duration: 90 minutes

 

Overview
Controlling laser-to-material interaction and energy coupling reduce process defects in laser welding. Laser beam shaping is a mainstream process in e-mobility manufacturing, which has evolved from research concept to industrial deployment over the last decade boosted by the battery manufacturing industry. The EU funded Lasers4NetZero project is pioneering laser beam shaping to address manufacturing challenges that remain difficult to overcome using conventional laser welding.


In this webinar, Prof. Alessandro Fortunato from the University of Bologna will first introduce the Lasers4NetZero project and its vision to revolutionize the e-mobility manufacturing; then, Prof. Pasquale Franciosa from WMG, University of Warwick, will show latest advances of laser beam shaping applications in laser welding, covering similar and dissimilar material joining. Following this, Zia Uddin from the University of Bologna will discuss the application of static core-ring beam shapes and their effects on melt-pool geometry and joint performance in aluminum-copper welding; finally, Reshad Bakhtar  from WMG, University of Warwick, will discuss how the material responds to dynamic beam shaping at MHz frequencies to improve weldability of aluminum alloys. The event will cover latest advances in experimental characterization and multi-physical predictions.

 

Who should attend
This webinar is intended for researchers and industrial practitioners working in laser welding, process development, battery manufacturing and e-mobility. It is also relevant to technology officers and managers interested in advanced manufacturing and the applications of laser beam shaping to enlarge the process window.

 

Agenda

TimeSpeakerContent
09:00 – 09:20Prof. Alessandro Fortunato
Professor in Manufacturing Technology
Introduction to the Lasers4NetZero project and its objectives for advancing e-mobility manufacturing
09:20 – 09:40Prof. Pasquale Franciosa
Professor in Laser Beam Welding
Overview of laser beam shaping, its research landscape and applications in laser welding
09:40 – 10:00Zia Uddin
MSCA Fellow
Effects of static core–ring beam shapes on melt-pool geometry and joint performance in aluminum–copper welding
10:00 – 10:20Reshad Bakhtari
MSCA Fellow
Material response to dynamic beam shaping from kHz to MHz frequencies to improve weldability of aluminum alloys
10:20 – 10:30All speakersQ&A

 

Registration
The webinar is free to attend, but advance registration is required.
Register here: Webinar 1: Laser Beam Shaping for E-Mobility – Fill in form

 

Moderator
Prof. Alessandro Fortunato
Department of Industrial Engineering
University of Bologna, Italy
Coordinator, Lasers4NetZero Project

This project has received funding from the European Union's HORIZON-MSCA-2022-DN-01 under grant agreement No 101119711